Accurate Sheet Metal, Inc. Proudly serving the Valley for 50 years!
Frequently Asked Questions
How can I request a quote?
You may submit a request for quote through one of the following methods. Please remember to include a drawing, material type, material thickness, quantity, and your contact information.
- E-mail our office at Sales@AccurateSM.com.
- Call our office to speak to our estimator at (480) 820-4256.
- Submit your information in our online Contact Form.
What industries do you serve?
We have a broad range of clients in diversified industries. We are continually expanding our experience in new markets. Industries that we have contributed to include:
- Traffic Control, Military, Defense, Robotics, Spacecraft, Aviation, New Construction, Medical, Electrical/Construction, Electronics, Home Lighting, Outdoor Grills, Engineering, Semiconductors, Computers & General Electronics, Communications, Testing & Measurement Equipment, Process Sensing and Control, Wildlife & Environmental Research, Pressure & Flow Calibration, Automated Production, Security Systems, Proton Alignment Resonance Technology, Recreational Vehicles, Kitchen Remodeling, Artwork, and Custom work.
What services do you offer?
Fabrication Finishing
CNC Punch Anodize (Clear or Color, Type II or Type III)
Countersink Black Oxide
Design Bright Nickel Chrome
Drill Buff
Flatten Chem Film / Alodine / Iridite
Form / Bend Chromate
Grind Electroless Nickel
Hardware Installation Electropolish
Laser Engrave & Fill
Light Assembly Etch
Mill Heat Treat
Notch Mask
Part Mark Mil-Spec Coatings
Rivet Paint
Sand / Grind Passivate
Saw / Cut Polish
Shear Powder Coat
Timesave Prime
Tumble Deburr Sandblast
Waterjet Silk Screen
Weld Zinc (Clear, Yellow, or Black)
What range of material thicknesses can you bend?
Here are some common thicknesses that we bend. We can consider some projects beyond these parameters on a case-by-case basis.
- Aluminum: ≤ .190” x 120”
- Steel: ≤ .125” x 72”
- Stainless Steel: ≤ .090” x 72"
What range of material thicknesses do you work with?
Below are common materials and thicknesses that we work with. This list is not all-inclusive, so please do not hesitate to contact us if your project utilizes a material not listed here.
Aluminum 2024-T3, 3003-0 Bare, 5052 H32, 6061-0 Bare, 6061-T4, 6061-T6, Alclad 0.016" - 0.250"
Steel 301/302/304 Stainless 0.023" - 0.090"
Steel 316/321/347 Stainless 0.035" - 0.074"
Steel Cold Rolled, Galvanized 0.016" - 0.130"
Steel Shim Stock 0.010" - 0.025"
Steel Spring Stainless 0.025" - 0.063"
Titanium Grade 2 0.200" - 0.063"
Brass Half Hard / Full Hard 0.010" - 0.125"
Copper OFHC / C110 0.021” - 0.150"
Plastic Polycarbonate 0.015" - 0.060"
Do you do duct work, elbows, roofing, chimenys, HVAC, etc?
No, we do not. We are a precision facility dedicated to maintaining tight tolerances. We refrain from bidding on these types of projects as they would be too expensive for our customers. This would be like hiring a brain surgeon to mow your lawn.
Do you offer installation?
No, we do not do on-site work.
Do you offer delivery?
Yes, we offer delivery within the Valley and can ship worldwide. This will be included in your price if requested, or you can pick up your completed parts at our facility.
Are you RoHS / DFARS compliant?
Yes. Since we make precision metal parts to your specifications, if the RFQ or drawing calls out RoHS or DFARS compliance, the parts will be made as such.
What is your lead time?
Our standard lead time is three weeks A.R.O. (After Receipt of Order). Small jobs may be completed much sooner. Additional lead-time may be necessary if your part requires plating, painting, etc. or is of significant quantity or complexity. If you require a specific delivery date, please feel free to discuss it with us. Our expedite fee is the greater of $85.00/10% when required.
Do you offer First Article Inspection Reports?
Yes, First Article Inspections start at $85.00 per item depending on the complexity of the report.
Can you provide certifications?
Yes, but this should be specified at the time of the request for quote. Requests made after the time of the order may be subject to a $25.00 charge.
What is your minimum lot charge?
Our minimum lot charge is $85.00.
What file types can you accept?
We utilize most standard file types, including:
PDF, DXF, DWG, STEP, DOC, XLS, BMP, ZIP, SLDPRT, SLDDRW, etc.
What forms of payment do you accept?
We can process your payment with Visa, MasterCard, American Express or Discover Cards with a 3.75% fee. We also accept cash, checks, or Net/30 terms if you are approved for a credit account.
How can I establish a credit account?
To apply for a Net 30 credit account, please submit a completed credit application and tax exemption form (see Downloads, below).
Are you hiring?
We currently do not have any openings; however we are still accepting applications to review should anything open up. Please e-mail or fax us a completed employment application (see Downloads, below). and/or send us your resume for review.